Home > Others
Sort:
  • NPP Series Nominal PP Melt Blown Filter Cartridges

    Description PP melt blown filter cartridges are high dirt holding capacity, low pressure drop, high flow rate, good chemical resistance, no fibre release, longer service life and effectively filtration for suspended particle, sediment and other kinds of impurities. PP melt blown cartridges are economical and classical filter media, widely used in liquid prefiltration industries. Specification Filter Media:Polypropylene Length:5", 9.75", 9.8", 10", 20", 30", 40", 50", 60", 70" (According to customers requirements) Inside Diameter: 28mm, 30mm (Special ID is accepted) Outside Diameter:2.36"(60mm), 2.4"(61mm), 2.5"(63mm), 2.55"(65mm) (Special OD is accepted) Filtration Rating:1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm Gasket/O-ring:Silicone, EPDM, Viton, Buna End Cap:DOE, 222/Flat(SOE), 222/Fin(SOE), 226/Flat(SOE), 226/Fin(SOE) Feature 1. PP filter cartridges are mainly applied to most industry standard housings 2. 100% FDA approved safety polypropylene material have a lot of demanding applications 3. Superior PP melt blown filters are high filtration efficiency, consistent good performance 4. PP cartridges are multi-layered construction, high contaminant holding capacity and longe service life 5. Customized special PP melt blown filter cartridges are accepted to meet specific application requirements 6. Many types of end caps are available by thermally-bonded, such as 222/fin, 222/flat, 226/fin, 226/flat etc. Applications 1.PCB industry 2.Plating solution 3.Food & Beverage 4.Electronic Industry 5.Petrochemical Process 6.Chemicals and Solvents 7.Pre RO/ID water filtration 8.Industrial waste water treatment

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • BCF series Backwashable PP Pleated Cartridges

    Description Backwashable PP Pleated Cartridges are mainly designed for power plant condensed water filtration. PP Filter media of backwashable pleated cartridges are available in absolute ratings ranging from 1 to over 100 microns to meet the removal requirements of each individual condensate system. Like all the condensate filter cartridges from Hongtek, a variety of end fittings can be selected to retrofit the elements in existing power plant condensate filter systems. Feature 1. High surface area of superior pleated media, high dirt holding capacity 2. Wide range of chemical compatibility, long service life and economic cost 3. Less damage from iron and copper to the boiler and turbine of condensed system 4. Backwashable cartridges absolute micron rating, removal efficiency rated at 99.9% 5. Backwashable PP pleated cartridges designed for power plant condensed water filtration 6. Backwashable pleated cartridges can be backwashed to prolong life and easy to change out Applications 1.Electronics 2.Boiler Water 3.Cooling Water 4.Pre RO Filtration 5.Sea Water Desalination 6.Condensed Water Filtration 7.Power Plant Water Treatment

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • PET series Polyester Pleated Filter Cartridges

    Description PET pleated cartridges are produced using 100% synthetic fibers, which are free of binders or adhesives, exhibit highly effective retention efficiency, also are washable and reusable commodiously. Polyester pleated filter cartridges also called water replacement filters, the pleated design increased surface area and extends service life, makes PET pleated cartridges to be one of the most economic options in water treatment. Feature 1. Excellent compatibility with a wide range of chemicals and sanitizing agents 2. Fewer change outs and easy to washed and reuse, less maintenance are required 3. Available in a lot of lengths to meet different demands and equipment requirements 4. Plastisol (PVC) end caps/gaskets offer positive seal, large surface filtration area with high flow rate 5. Polypropylene outer netting strengthens resistance to pressure, prolong the service life of PET pleated cartridges Applications 1.PCW 2.Pre RO/DI 3.Electronics 4.Drinking Water 5.Food & Beverage 6.Industrial Water & Plating 7.Chemicals & Organic Solvents 8.Chemicals & Organic Solvents

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • APC series Absolute PP Pleated Filter Cartridges

    Description Absolute PP pleated filters are constructed with 100% advanced polypropylene materials and assembled by high technology thermal bonding equipment. Absolute PP pleated cartridges are offered in absolute rate Beta 5000(to 99.98%) retention efficiencies. Absolute pleated filter cartridges are wide chemical compatibility using 100% polypropylene materials comply with FDA, an ideal choice for efficient filtration of critical industries. Feature 1. High surface area, resulting in low pressure and excellent dirt holding capacity 2. Wide chemical compatibility using 100% polypropylene material to meet FDA requirements 3. Assembled by high technology thermal bonding equipment, non-adhesive and 100% integrity tested 4. PP pleated filter cartridges are absolute removal ratings for consistent and reliable performance 5. Absolute PP pleated cartridges are offered in absolute rate Beta 5000(to 99.98%) retention efficiencies Applications 1.Waste water 2.Process Water 3.Fine Chemicals 4.Semiconductor 5.Deionized Water 6.R.O Prefiltration 7.Plating Chemicals

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • PCF Series Nominal PP Pleated Cartridge Filters

    Description PP Pleated Cartridge Filters are made of Polypropylene fiber media. PP pleated cartridge filters provide excellent filtration efficiency and chemical compatibility across a wide range of liquid filtration process applications.The constitution of nominal PP pleated filter cartridges adopt thermal welding techniques to seal all components, so no side leakage and optimizing PP pleated cartridge 100% integrity. PP pleated filter cartridges have large surface area that allow for greater system flow rate and higher dirt holding capacity than depth filters. PP pleated cartridges are widely used in prefiltration field requiring high purity. Feature 1. PP pleated cartridge filters are manufactured in clean room and high cleaning environment 2. PP pleated cartridges are low pressure drop, high capacity of impurities and long service life 3. Polypropylene pleated cartridges are strict election materials which according to FDA standard 4. Ulti-layers structure, good filtration efficiency and consistent of performance for broad application range 5.The components of PP pleated filters are assembled in fully sealed condition by thermal bond, free of binder Applications 1.Etchants 2.Chemicals 3.Cosmetics 4.Oil industry 5.Semiconductor 6.Food & Beverage 7.Medicine Filtering 8.Paints and Coatings 9.Prefiltration for RO/DI

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • BF Series High Flow Pleated Bag Filters

    Description High Flow Pleated Bag Filters are made of high quality pleated depth polypropylene,replace to Pall Marksman Series filters and easily retrofit into existing Size 1 and Size 2 filter bag housings. One piece Size 2 high flow pleated bag filters replaces up to 16pcs standard 10"(254mm) depth filters, making change-outs quick and easy. High flow bag pleated filters are inside-to-outside fluid flow, combine the performance advantages of filter cartridges and filter bags which use in bag filter systems. High flow bag filters provide high quality benefits and economic value, the pleated design increase the effective filtration area with high flow rate, long service and lower operating costs. Feature 1. Easy operation, simply maintenance and lower operating costs 2. Improve filter bags design, pleated bag filters provide high efficiencies & flow rates 3. 6 inch large high flow bag filters diameter suitable for high flow contaminant applications 4. Inside-to-outside fluid flow ensure the impurities trapped inside high flow pleated bag filters 5. High flow bag pleated filters offer broad chemical compatibility and high dirt-holding capacity 6. Replace to Pall Marksman Series filters and easily retrofit into existing Size 1 and Size 2 bag housings Application 1. Paints,Ink and coatings 2. Oil and water separation industry 3. Food and beverage water filtration 4. Water filtration in Power generation 5. Microelectronic, film, CD/DVD and resin 6. Prefiltration of RO and sea water desalination 7. Solvents, API and water filtration in pharm field

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • MF series Pleated High Flow Cartridges

    Description Pleated High Flow Cartridges are designed to be used in different filter housings which install 1 to 37 pieces cartridge filters. Pleated high flow cartridges are made by polypropylene media, large filter area and high filtration efficiency exceed 99%. High flow cartridge filters can be used for a variety of important industrial applications for different high flow rate request. High flow pleated cartridges are used as a direct replacement to 3M 740 series elements, reduce the number of normal 2.5" OD filter cartridges save much cost and manpower, longer service life and high dirt holding capacity. Feature 1. Easy to install and replace, save manpower and times 2. High flow pleated cartridges are high intensity and long service life 3. Wide range of chemical compatibility and suitable for a variety of fields 4. Pleated high flow cartridges are large flow rate and high dirt holding capacity 5. Direct replacement to 3M 740 series elements, longer service life and high dirt holding capacity 6. The sealing O-ring design no bypass to improve the filtering efficiency of high flow cartridge filters Application 1. Power plant condensed water filtration 2. Chemical industry, microelectronics industry 3. R.O. pre-filtration and sea water desalination 4. Petroleum chemical industry related filtering 5. Pharmaceutical ingredients, solvents,and water filtration 6. Drinking water, edible oil, beverage,beer, milk filtration

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • MP Series High Flow Pleated Cartridges

    Description High Flow Pleated Cartridges have high particle removal efficiency and strong contaminant holding capability. PP pleated high flow cartridges utilize polypropylene end caps, outer netting and inner hard core help to protect the radial pleated structure integrity and provide consistent performance and good quality for effective particle retention. Pleated high flow cartridges can directly 100% replace to 3M Cuno 7000 and 740B high flow series filter element. Feature 1. All polypropylene filter media construction and have wide chemical compatibility 2. Using the high flow pleated cartridges can save the replacement cost, manpower and space 3. High flow cartridge filters have high contaminant holding capacity due to the large filtration area 4. Pleated high flow cartridges are consistent high particle removal efficiencies throughout filter long life 5. The unique radial pleat design of high flow cartridges lead to high flow rate and good filtration efficiency 6. Pleated high flow cartridge filters system requires 90% fewer filters as competitive 2.5" water filter systems for a given flow rate 7. All raw materials are FDA compliant and 100% integrity testing for high flow cartridge filters, directly replace to 3M Cuno high flow series filter element Application 1. Refining 2. Process Waters 3. Machine Coolants 4. Boiler Condensate 5. Pre-RO Filtration 6. Petroleum Chemical Industry 7. Injection & Produced Waters 8. Ground/Reclaimed/Waste Waters

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • PF series Pleated High Flow Filters

    Description Pleated High Flow Filters are made of advanced polypropylene microfiber, pleated filters are Parker high flow water filters replacement. Pleated high flow filters can directly replace Parker Megaflow and Fulflo series high flow pleated filters for high flow applications water filtration system. The water treatment volume for per pleated high flow filter cartridge equals to 10 pcs standard 40 inch length and 2.5" outer diameter water filter cartridges,inner single O-ring and double O-rings end caps insure no bypass and handle design makes more easier to install and change out. Feature 1. Good performance with consistent good filtration efficiency and long service life 2. High flow pleated filters are high dirt holding capacity, high flow rates and low pressure drops 3. High flow filter cartridges are wide chemical compatibility for different applications 4. Pleated high flow filters are easier install and replace to Parker Megaflow and Fulflo series high flow filters 5. Per high flow filter equals to 10pcs 40 inch length and 2.5" outer diameter standard filters,save costs and workplace Application 1. Petrochemical,refineries 2. Food and beverage filtration 3. Power plant water treatment 4. Paints, inks, magnetic media 5. Sea water desalination and RO pre-filtration 6. API,solvents, and water filtration in biopharm market

    Hongtek Filtration Co., Ltd.  

    2019-01-04

  • HFA Series Pleated High Flow Filter Cartridges

    Description The large diameter geometrical design of polypropylene pleated high flow filter cartridges enlarge surface filtration area, high dirt holding capacity to save the quantities of filter cartridges, high flow rate when filtration efficiency exceed 99%. high flow filter cartridges are wide range of chemical compatibility and applications, the ideal option for industrial high flow water filtration system to protect RO membrane. Feature 1. Gradient pore structure of high flow filter cartridges provide layered filter function 2. Outer hard cage can withstand higher pressure than Pall Ultipleat high flow filters made by soft netting 3. High flow filter cartridges are high filtration efficiency, lower waste disposal costs and more economical 4. Inside to outside filtration pattern of High flow filter cartridges ensure holding all impurities stay inside the pleated media 5. The highest flow rate of High flow filter cartridges could get 110 M3/H and Beta 5000 rated (99.98% efficiency) 6. The reduction of filtration system space maximum 50% and lower maintenance costs when use High flow filter cartridges 7. Materials meet FDA requirements, wide chemical compatibility, no resins, binders, or adhesives and 100% integrity testing Application 1.Paints and coatings 2. Microelectronic, film and resin 3. Water treatment in Power generation 4. RO Pre filtration and sea water desalination 5. Solvents, API and water filtration in Bio field 6. Bottled water, high fructose, edible oil, soft drink and milk

    Hongtek Filtration Co., Ltd.  

    2019-01-04

21 - 30 Total 14626 (1463 pages)
1 2 3 4 5 ......1463To Page Go