Home > Textile Machinery & Parts > Others
  • Sell ptfe teflon adhesive fabric and tape

    We selected fine imported fiberglass, wove it as the basic cloth and coat it with PTFE resin, proceeded under high temperature with silicone and adhesives added, the product is called PTFE adhesive tape.

    Taixing Weiwei Conveyer Belt Co., Ltd.  

    2005-04-11

  • embroidery machine

    This mahcine can do embroidery,cutting,hollowing by one machine.As for the laser's features,It can process with high speed and high precision.It suits for the clothing factory and embroidery factory as well as art-craft factory.Please check in our website.

    Wuhan golden laser equipments manufacturing factor  

    2005-04-11

  • Sell Embroidery and Emgraving Machine

    This series products can embroidery and engraving on all different materials ,especially on jeans.their features are high speed,high precision,low cost.

    Wuhan golden laser equipments manufacturing factor  

    2005-03-24

  • Sell Pipe Bender KM-A38

    Features of Single Tip Hydraulic Pressure Pipe Bender: *Possesses the functions of hand moving,semi-automatic,full automatic functions. *accumulative body loop,the action is individually controlled,make oil pressure valve spare parts lifetime prolong. *Tri-step loop,actions of cooling,deposit,etc available,make hydraulic oil not deteriorate. *The main shaft is forged by special steel,treated by adjusting material. *Can set two kinds of angles,bend in turn,the program is simple and understandability. *The replacement of the mold is easy,high accurate rate.

     

    2005-01-31

  • Sell Pipe Bender KM-A100

    KM-A100 Features of Single Tip Hydraulic Pressure Pipe Bender: *Possesses the functions of hand moving,semi-automatic,full automatic functions. *Adopt oil pressure oil accumulative body loop,the action is individually controlled,make oil pressure valve spare parts lifetime prolong. *Tri-step loop,actions of cooling,deposit,etc available,make hydraulic oil not deteriorate. *The main shaft is forged by special steel,treated by adjusting material. *Can set two kinds of angles,bend in turn,the program is simple and understandability. *The replacement of the mold is easy,high accurate rate.

     

    2005-01-31

  • Sell Grinder 12288

    Features of Machine: *Perfect German Technology Design *Perfect structure,easy to operate. *Straight Teeth,bending back teeth can be switched at any time freely. *Indicating meter set high and low teeth to grind synchronously,ensure high and low different value. *A meter indicates and controls the centre height of saw blade with the different thickness,convenient and accurate. *No-step entering speed,more suitable for the grinding requirements of the saw blade of the different teeth distance. *Only control the centre height of grinding wheels,can reverse the saw teeth angle at any time.

     

    2005-01-24

  • Sell Cutter KM-275PA-S

    Hand-moving Metallic Circular Saw Machine KM-275PA Characteristics of Hand-moving Metallic Circular Saw Machine This series of metallic circular saw machines can be divided into: hand-moving ,air clamping ,semi-automatic types. Adopt dual sides and dual orientations clamping make the working component stable, the notch without burr, no powder in cutting, low noise, low pollution. Accurate cutting and the speed exceeds band saw , at the same time the cutting face is smooth but not sends out heat , save second machining. The machine head can be controlled to side cutting left and right or mill groove. Accurate angle , the pipe joint is perfect. Cycle cooling system, possess oil storage tank with special big capacity, ensure saw blade lifetime , the cutting face is flat. Automatic clamp automatic knife entering type, except basic type structure and parts ,the entering and reversion of clamping pliers and machine head are all air pressure automatic type. The products are divided into H1 high speed type and H2 low speed type, can suit various metallic material cutting. Specification KM-275PA Main machine motor 2/4HP 1.8/1.3kw Rotate speed of Main Shaft RPM96/48 Outer diameter of Saw Blade 250/275mm Inner hole of Suitable Saw Blade ?2mm Pin hole of Suitable Saw Blade 2注11譖CD63 Maximum Cutting Round Pipe ?0mm Maximum Cutting Square Pipe 75?5mm Maximum Cutting Round Rod ?8mm Cooling Water Pump 90w Compressed Air 0.6Mpa Volume of machine 1400x1080x1800 Net Weight of machine 220kg

     

    2005-01-24

  • Sell Pipe Cutter KM-275PA

    Hand-moving Metallic Circular Saw Machine KM-275PA Characteristics of Hand-moving Metallic Circular Saw Machine This series of metallic circular saw machines can be divided into: hand-moving ,air clamping ,semi-automatic types. Adopt dual sides and dual orientations clamping make the working component stable, the notch without burr, no powder in cutting, low noise, low pollution. Accurate cutting and the speed exceeds band saw , at the same time the cutting face is smooth but not sends out heat , save second machining. The machine head can be controlled to side cutting left and right or mill groove. Accurate angle , the pipe joint is perfect. Cycle cooling system, possess oil storage tank with special big capacity, ensure saw blade lifetime , the cutting face is flat. Automatic clamp automatic knife entering type, except basic type structure and parts ,the entering and reversion of clamping pliers and machine head are all air pressure automatic type. The products are divided into H1 high speed type and H2 low speed type, can suit various metallic material cutting. Specification KM-275PA Main machine motor 2/4HP 1.8/1.3kw Rotate speed of Main Shaft RPM96/48 Outer diameter of Saw Blade 250/275mm Inner hole of Suitable Saw Blade ?2mm Pin hole of Suitable Saw Blade 2注11譖CD63 Maximum Cutting Round Pipe ?0mm Maximum Cutting Square Pipe 75?5mm Maximum Cutting Round Rod ?8mm Cooling Water Pump 90w Compressed Air 0.6Mpa Volume of machine 1400x1080x1800 Net Weight of machine 220kg

     

    2005-01-24

  • Sell Pipe Bender KM-50TNC

    Pipe Bender KM-A50TNC Features of Single Tip Hydraulic Pressure Pipe Bender: *Possesses the functions of hand moving,semi-automatic,full automatic functions. *Adopt oil pressure oil accumulative body loop,the action is individually controlled,make oil pressure valve spare parts lifetime prolong. *Tri-step loop,actions of cooling,deposit,etc available,make hydraulic oil not deteroprate. *The main shaft is forged by special steel,treated by adjusting material. *Can set two kinds of angles,bend in turn,the program is simple and understandability. *The replacement of the mold is easy,high accurate rate.

     

    2005-01-24

  • Sell Pipe Bender KM-A100

    KM-A100 Features of Single Tip Hydraulic Pressure Pipe Bender: ● Possesses the functions of hand moving,semi-automatic,full automatic functions. ● Adopt oil pressure oil accumulative body loop,the action is individually controlled,make oil pressure valve spare parts lifetime prolong. ● Tri-step loop,actions of cooling,deposit,etc available,make hydraulic oil not deteroprate. ● The main shaft is forged by special steel,treated by adjusting material. ● Can set two kinds of angles,bend in turn,the program is simple and understandability. ● The replacement of the mold is easy,high accurate rate.

     

    2005-01-21

651 - 660 Total 663 (67 pages)
1......64 65 66 67 To Page Go